PCL to TIFF 64-bit / 64-bit .NET 11.0

许可: 免费试用 ‎文件大小: 24.22 MB
‎用户评分: 5.0/5 - ‎2 ‎评分

PCLTool SDK v11.0 - 选项 IV。用于捕获和转换 PCL 到 Tif, PCL 到 Emf, Pcl 到 Png 和 Pcl 到文本。 备选案文四.在提取文本时将复杂 PCL 转换为栅格/矢量文件格式。 PCLTool SDK - 选项 IV。包括: PCLXForm, PCLCode, PCLsplit, ImgCvt, 过滤器, TNXDump 和 PCLTool. PCL2TIFF 是唯一能够将复杂 PCL 转换为 TIFF 的产品,具有提取的文本。 PCLTool SDK - 选项 IV。非常适合需要将传统 PCL 转换为 TIF、EMF 或 BMP 文件格式的开发人员。 与选项 V 不同,它不允许自定义脚本编程拆分或编辑文档,同时将它们转换为 TIF、EMF 或 BMP 格式。 备选案文四.还可以从几乎任何 PCL 文件中提取文本 - 即使是具有 "scrambled" 文本或栅格化文本的文件 (与 OCR 过程的 1-2 小时)。如果您以后发现需要自定义转换过程,如添加徽标、条形码或 OMR 标记 - 如果您发现需要编写自己的自定义选项,则始终可以升级到选项 V. 或选项 .exe I。 PCLTool SDK v11.0 是 PageTech 的最新版本,现在在所有 Windows 7 环境中完全支持 32 位、32 位 .NET、64 位和 64 位 .NET。添加了智能邮件条形码、2D Datamatrix 条形码和许多其他新功能。现在,我们所有的程序都在 Microsoft Visual Studio 中开发,以便于提供源代码。 PCLTool SDK v11.0 新功能: * PCL 条形码 - 增加了将智能邮件和数据矩阵二维条码插入 PCL 打印文件的能力。 * PCL 到 TransPromo - 添加了新功能,将 (HVTO) 大容量 PCL 银行对账单转换为文本、栅格或矢量数据,以迁移到任何输出管理系统。 * PCL 到 JPEG - 添加了将 PCL 转换为 JPEG 格式的支持。 要下载最新版本或阅读发行说明,请访问www.pagetech.com了解完整信息。

版本历史记录

  • 版本 11.68 发布于 2012-01-27
    新增了新的功能,以模糊银行对帐单中的支票帐号和许多新的错误处理功能。
  • 版本 11.6 发布于 2011-07-08
    PCLTool SDK v11.6 是 PageTech 的最新版本,在所有 Windows 7 环境中完全支持 32 位、32 位 .NET、64 位和 64 位 .NET。此版本中还添加了智能邮件条形码、2D Datamatrix 条形码和许多其他新功能。
  • 版本 11.0 发布于 2011-05-05
    PCLTool SDK v11.0 是 PageTech 的最新版本,现在在所有 Windows 7 环境中完全支持 32 位、32 位 .NET、64 位和 64 位 .NET。此版本中还添加了智能邮件条形码、2D Datamatrix 条形码和许多其他新功能。

软件信息

终端用户许可协议

PCLTool SDK End User License Agreement This PAGE TECHNOLOGY MARKETING, INC. ("PageTech") End User License Agreement accompanies a PageTech software product and related explanatory written materials ("Software"). The term Software shall also include any upgrades, updates or modified versions of the Software listed in Exhibit A licensed to you by PageTech. The copy of the Software is licensed to you as the end user. RIGHTS GRANTED. You must read this Agreement carefully before indicating acceptance by using the Software. PageTech grants to you a nonexclusive license to use the Software, provided that you agree to the following: You may install the Software in a single location on a hard disk and make a backup copy of the Software. Under no circumstances is this software to be sold, bartered, traded, rented, bundled, sublicensed or provided as part of a commercial product or service. PageTech reserves distribution and usage rights not expressly granted. The Software may not be distributed with, or as part of, any commercial product without the express written permission of PageTech. The Software is owned by PageTech and its structure, organization and code are the valuable trade secrets of PageTech. The Software is also protected by United States Copyright Law and International Treaty provisions. You agree not to modify, adapt, translate, reverse engineer, decompile, disassemble or otherwise attempt to discover the source code of the Software. Except as expressly authorized in this Agreement, Licensee may not create derivative works based upon the Software, or sub-license, distribute, transfer, copy, reproduce or modify the Software, or allow any third party to access or use the Software (including any deletion of code or addition of code to the Software). Except as stated above, this Agreement does not grant you any intellectual property rights in the Software. PageTech retains all right, title and interest in and to all copyrights, trademarks, service marks, trade secrets and other proprietary rights in the Software not specifically granted to Licensee herein. NO WARRANTY. The Software is being delivered to you AS IS and PageTech makes no warranty as to its use or performance. PAGETECH DOES NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE OR DOCUMENTATION. PAGETECH MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AS TO NONINFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT WILL PAGETECH OR ITS SUPPLIERS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES, INCLUDING ANY LOST PROFITS OR LOST SAVINGS, EVEN IF AN PAGETECH REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY THIRD PARTY. GOVERNING LAW AND GENERAL PROVISIONS. This Agreement will be governed by the laws of San Diego County, California USA, excluding the application of its conflicts of law rules. This Agreement will not be governed by the United Nations Convention on Contracts for the International Sale of Goods, the application of which is expressly excluded. If any part of this Agreement is found void and unenforceable, it will not affect the validity of the balance of the Agreement, which shall remain valid and enforceable according to its terms. You agree that the Software will not be shipped, transferred or exported into any country or used in any manner prohibited by the United States Export Administration Act or any other export laws, restrictions or regulations. This Agreement shall automatically terminate upon failure by you to comply with its terms. This Agreement may only be modified in writing signed by an authorized officer of PageTech. Should any litigation arise between the parties relating to this Agreement, each party shall be responsible for its own costs and expenses including reasonable attorney fees. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (b)(3)(ii) of The Rights in Technical Data and Computer Software clause at 252.227-7013. Contractor/manufacturer is PageTech. ACCEPTANCE. PageTech's web-based registration processing system will not permit the download of this Software unless the Licensee agrees to the terms and conditions of PageTech's license agreement. Licensee's unconditional acceptance of the Software license is provided by a "I Agree" response to a web page query or the software download instructions will be withheld. Licensee's unconditional acceptance of the Software is also provided by a "I Agree" response to get past the initial splash page within the program. If you do not agree with the terms and conditions of this Agreement, remove the software from your hard disk. SOFTWARE SUPPORT. Web-based or email technical support is provided at PageTech's sole discretion via the Support Form located at: http://www.pagetech.com/support/supportform.php. In conjunction with completing the required support form, Licensees must also run the TechSupport.exe program provided to gather all the required information needed for PageTech to understand the problem. Under no circumstance will the PageTech ever provide technical support via the telephone. EXHIBIT A: The configuration of the Software provided in this Agreement includes the following programs and functionality: PCLTool.exe: Converts PCL files into .BMP, .PCX, .DCX, .TIF, .PNG, .XPS and .PDF file formats. Views and Searches PCL. Prints PCL on virtually any Windows printer driver (except PDF or other drivers that output file formats). Extracts text from PCL. Restrictions/Limitations: * Initial Splash screen requires "I Agree" response to the license agreement. * Inhibits printing to any PDF, TIFF or other file format via a third party printer driver. * Converts up to 2,000 page PCL files into raster formats only with watermark, only the first page is without watermark. * Options to convert PCL into vector EM, WMF and PMF output file types are unavailable (grayed-out). * Option to convert PCL into vector PDF output file type is unavailable (grayed-out). * Option to View PCL in vector mode in View PCL and Search Text dialogs are unavailable (grayed-out). * Only one instance of the program can be running on the same PC at the same time. * Views, prints or extracts texts from PCL files with a maximum of 2,000 pages per file. TNXDumpG.exe: Formats the Text Extraction (.TNX) files into various ASCII text formats. Use of this Software indicates your acceptance of the foregoing Agreement. (c) 1999 Page Technology Marketing, Incorporated. All rights reserved.