软件QMSys公差和贴合是一个工程程序，为设计师，工程师，计量学家，质量控制计划工，机械师，其其目的是节省时间，防止人为错误，以确定名义和限制价值的机器零件。它可用于根据以下国际、欧洲和国家标准选择适合和确定机器零件的公差和偏差： - ISO 286、EN 20286、ANSI B4.2、GOST 25346，标称尺寸高达 3150mm - DIN 7172，GOST 25348，标称尺寸超过3150mm至10000mm - ANSI B4.1，用于标称尺寸，尺寸高达 200 英寸 - ISO 2768-1，用于标称尺寸，无高达 3150mm 的单独公差指示 ISO 286 标准用作线性尺寸公差的国际标准，在大多数工业发达国家都采用相同或修改的措辞作为国家标准 - ANSI B4.2、GOST 25346、BS 1916、BS 4500、JIS B 0401、IS 919、AS 1654。 使用 QMSys 容差和拟合软件可以解决以下任务： - 根据 ISO 3，ANSI Z17.1 选择从首选编号系列 R5 到 R80 的合适尺寸。 - 根据 ISO 1829、ISO 286、DIN 7154、DIN 7155、DIN 7157 或 ANSI B4.1 选择合适的贴合 - 分别根据 ISO 286 设计符合 ISO 的间隙或干扰 - 确定机器零件的尺寸公差和偏差 - 计算数控程序的双边对称公差 - 根据 ISO 2768 确定非规定的限值偏差。 拟合设计自动处理，完成后，计算为用户提供一组拟合，其参数满足输入要求
版本历史记录
- 版本 5.3 发布于 2010-06-11
软件信息
- 软件分类： 业务 > 计算器和转换器
- 发布者： Qualisyst Ltd.
- 许可： 免费试用
- 价格： $65.00
- 版本： 5.3
- 适用平台： windows
终端用户许可协议
LICENSE AGREEMENT Please carefully read the following license agreement. Installation of this software means that you accept all the below mentioned conditions. INSTALLATION No files will be copied into your windows directory. No files in your windows directory will be changed. Uninstallation completely removes the program from your computer. LICENSE By purchasing this software you also obtain a non-transferable right from the producer for installation and use of this software on one computer. DEMO VERSION As a user, you have the right to test this software after installation. Distributors may freely distribute the product as long as no alterations are made to the files. Distributors have to state that this software is Shareware. Computer magazines are hereby authorized to distribute this shareware via a cover disk, CD-ROM or DVD. EXTENSION, CORRECTIVE PATCHES, NEW VERSIONS The producer may issue various extension modules, corrective patches or new versions. All these supplements are available by uploading from web pages of the producer (partners of the producer). These extension modules, corrective patches and new versions can be used only within a valid license. OWNERSHIP RIGHTS AND COPYRIGHTS Ownership rights and copyrights to this software (including all illustrations and document) belong to the producer. ACTIONS WHICH ARE NOT PERMITTED - Circumventing or deleting in any way protection of those parts of the software which are locked for displaying. - Circumventing or deleting in any way protection preventing unauthorized use of the software. - Copying and using the algorithms and procedures included in this software for the purpose of development of other software. - Any distribution of this software (or its parts) in return for payment. - Providing any information (particularly the Authorization Code) which could lead to unauthorized use of the software by a third party. LIABILITY FOR DAMAGE This technical and engineering software is designed for professional workers. It cannot in any way replace expert opinions or material and safety tests. The producer is, therefore, not responsible for any direct and/or indirect damage caused by errors in the software or due to its incorrect use, even in cases where the producer or his contractual partners is warned that such damage may arise. The user agrees with this level of risks. GUARANTEES The producer is not responsible for trouble-free operation of the software. The only chance of remedy is that the producer will try to correct any possible defects and resolve the problems at his discretion.